Arris DG950A

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Arris DG950 A

FCC approval date: 25 March 2011
Country of manuf.: China

Amazon image

ASIN
B00CMJYYFY (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router, cable modem

Power: 100-240 VAC ~ 50/60 Hz, 0.5 A
Connector type: C7P

CPU1: Broadcom BCM3380
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Brand? Model?)

Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 1
USB ports: 1

WI1 module: Broadcom BCM943225HM
WI1 module IF: Mini PCIe (half)
WI1 chip1: Broadcom BCM43225
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Broadcom BCM3380
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4

bgn

Flags: DOCSIS 3.0

Default SSID: ARRIS-XXXX (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 8 are Arris devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 12 are Arris devices

802dot11 OUI: 00:1D:CE
Ethernet OUI: 00:1D:CE

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Touchstone Data Gateway DG950

Product page  • User's Guide  • Datasheet

The default SSID appears (per the label) to be ARRIS-XXXX where XXXX appears to

be a the last two octets of the wireless interface MAC + 2 (w/ upper case letters).

It can probably be safely assumed that this device uses an all-Broadcom chipset.

  • Arris DG950A - DOCSIS 3.0 (8x4)
  • Arris DG950S - Euro-DOCSIS 3.0

Specifications

Unlocking Settings

 • Unlocking Settings
This modem/router combo typically ships as a rental from an ISP with a locked down version of the firmware that is intended to prohibit the changing of certain settings such as SSID, the "Pre-Shared Key", Channel, Security Mode, among others.
The firmware restrictions, however, are easily bypassed. The HTML output of the router's administration panel is the only thing changed; the internals are untouched.
By using Google Chrome and the "Inspect Element" tool, one can remove the "disabled" attributes from the grayed-out fields and the style="display:none;" from the "Apply" button.
Because none of the internals of the firmware were modified, the firmware will process the html input from this newly unlocked form just as if the form was never locked in the first place.
If Suddenlink is your ISP, try the login "mso" and the password "suddenlink."