D-Link DGL-3420

D-Link DGL-3420 A1

Manuf (OEM/ODM): Global Sun WL AP 2554 RA1

FCC approval date: 23 December 2004
UPC: 790069273384 (UPC DB, On eBay)
Country of manuf.: Taiwan, China

Amazon image

ASIN
B0006TIA0M (, On Amazon, On CCC)

Type: bridge

Power: 5 VDC, 2 A
Connector type: barrel

CPU1: Atheros AR2313A
FLA1: 1 MiB1,048,576 B 8,192 Kib 1,024 KiB 8 Mib 9.765625e-4 GiB  (Macronix MX29LV800BTC-70)
RAM1: 8 MiB8,388,608 B 65,536 Kib 8,192 KiB 64 Mib 0.00781 GiB  (ICSI IC42S16400-7T)

Expansion IFs: none specified

WI1 chip1: Atheros AR2313A
WI1 chip2: Atheros AR5112A
WI1 802dot11 protocols: abg
WI1 antenna connector: none

ETH chip1: Atheros AR2313A
ETH chip2: Kendin KS8721B
LAN speed: 100M
LAN ports: 1

abg

Additional chips
4.5 to 6GHz Power Amplifier IC;Microsemi;LX5506;MSC, 5506, 436GR;1;InGaP/GaAs HBT;16-pin MLPQ;
2.4GHz Power Amplifier IC;Microsemi;LX5510;MSC, 5510, 442FE;1;InGaP/GaAs HBT;16-pin MLPQ;3 mm x 3 mm;

Stock FW OS: ThreadX G4.0.4.0

Default IP address: 192.168.0.30
the IP 192.168.0.30 is used by 7 additional devices
of which 6 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices

802dot11 OUI: 00:13:46 (13 E, 20 W)
Ethernet OUI: 00:13:46 (13 E, 20 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

• Support page

"WL AP 2554 RA1" and "HW Rev A3" is silkscreened on the board in the FCC photos.
"WL AP 2554 RA1-B10" and "Rev V1.0" is silkscreened on (at least one) production model board.

Firmware notes

The firmware is compressed with arj
OS: ThreadX JADE/Green Hills Version G4.0.4.0
ar531x, 3.0.1.12, 18:00, 08 Dec, 2004, Build 1048 (dgl3420_firmware_100.bin)

Serial

Pinout

It's on the back of the unit, presumably.

Tx seems to be the large used pad next to the two large grounded pads - both of which are somewhat below the power connector. The output doesn't appear to be particularly useful.. a trait which may be shared with other Global Sun AR231x + ThreadX devices..

Boot log

aaa
bbb
EZ

Probable used PSU(s)

The power supply which seems to be bundled with US sold units looks to be a JENTEC JTA0302A. The connector is smaller than usual..

JENTEC JTA0302A (more)
Input: 100-120 VAC ~ 50-60 Hz, 0.5 A
Input connector: NEMA 1-15P Style: small, straight Manuf. in: China
Output: 5 VDC, 2 A
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ??