D-Link DI-714P+ rev B1
D-Link DI-714+ B1
Manuf (OEM/ODM): AMIT
Country of manuf.: Taiwan
Type: wireless router, print server
FCC ID: KA2DI714PPLUS
Power: 5 VDC, ? A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.2 mm (ID), 10 mm (LEN)
CPU1: Conexant CX82110-51
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (AMD Am29LV800BB-90EC)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (GLT GLT5640L16-6TC)
Expansion IFs: Parallel
WI1 module: National Datacomm NWH1021
WI1 module IF: unknown
WI1 chip1: Texas Instruments ACX100
WI1 chip2: Ralink Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Conexant CX82110-51
Switch: Kendin KS8995X
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
b
Flags: schematics
Default SSID: default (99 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Enhanced 2.4GHz (802.11b) Wireless Router plus Print Server
• Support page
"103408600Y1" and "WPA400AM-Y1" is silkscreened on the mainboard.
It is possible these units may have differing wireless modules (which do not appear to be standard PCMCIA). This particular one uses a National Datacomm NWH1021. The FCC photos depict the device with an RFMD based DBTel card, however, the FCC photos depict a different main board (probably for the A1 revision).
The OUI of the MAC on the wireless module label is 00:80:C6 (National Datacomm). The OUI on the label affixed to the router is 00:0D:88 (D-Link).
The RP-SMA antenna leads on the case exterior are soldered directly to the wireless module.
Images
- from D-Link
main
- my terrible board scans
board top, in case
board top, removed from case, card removed
board bottom
