Gemtek WHRTC-100GW
Gemtek WHRTC-100GW
FCC approval date: 28 December 2004
Type: wireless router, Powerline Access Point
FCC ID: MXF-HR930819G
Power: 110-120 VAC ~ 50/60 Hz, 0.1 A
Connector type: C7
CPU1: Broadcom BCM4712
CPU2: Conexant CX90010-11
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Intel TE28F160C3BD70)
RAM1: ? MiB (ISSI Model?)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM4712
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Broadcom BCM4712
Switch: Marvell 88E6063
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Flags: HomePlug 1.0
Default SSID: default (99 addl. devices)
Default IP address: 10.0.0.2
the IP 10.0.0.2 is used by 9 additional devices
of which 0 are Gemtek devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are Gemtek devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| TRENDnet TPL-111BR | RYK-WHRB100 MXF-HR930819G |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
Home Plug Wireless 802.11g Router
"WHRTC-100GW_V03" and "ENG-103-8603" is silkscreened on the board in the FCC photos.
- This device is using a SiGe SE2525L 2.4GHz power amplifier.
Default settings are per the FCC manual. They very well may be completely wrong.
- The WWW interface's realm is noted as Wireless + HomePlug Design
- in the IE password prompt box for the web UI.
