Linksys WAP300N
Linksys WAP300N
Manuf (OEM/ODM): U-MEDIA
FCC approval date: 05 December 2012
(Est.) release date: 30 April 2013
UPC: 745883597208 (UPC DB, On eBay)
Country of manuf.: Taiwan
Type: access point
FCC ID: Q87-WAP300N
IC ID: 3839A-WAP300N
Power: 12 VDC, 0.5 A
Connector type: barrel
CPU1: Ralink RT6856
FLA1: ? MiB (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25)
Expansion IFs: none specified
WI1 chip1: Ralink RT5592
WI1 802dot11 protocols: abgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Ralink RT6856
LAN speed: 100M
LAN ports: 1
abgn
Default IP address: 10.100.1.1
the IP 10.100.1.1 is used by 2 additional devices
of which 2 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 143 are Linksys devices
802dot11 OUI: none specified
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Access Point
• Support page • (Template link outdated)
The Cisco logo and "0500-2130741000" is silkscreened on the board in the FCC photos.
The FCC test report would seem to indicate that this device is using RT5592. It is presumed to be using this chip..
Per the manual..
- the device will attempt to acquire an IP address via DHCP by default. if it fails, the IP will be set to 10.100.1.1.
Wi-Fi Certified : WFA16767 (as of 12/11/2012)
