Linksys WRT610N v2
Linksys WRT610N v2
Manuf (OEM/ODM): CyberTAN
FCC approval date: 29 July 2009
UPC: 745883585205 (UPC DB, On eBay)
Country of manuf.: China
S/N prefix: CTG1
Amazon image
ASIN
B001AZ01EO (
, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Type: wireless router
FCC ID: Q87-WRT610NV2
IC ID: 3839A-WRT610NV2
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: Broadcom BCM4718A1
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Eon EN29LV640B)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix H5PS5162FFR)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM4718A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM4322
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4718A1
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 143 are Linksys devices
802dot11 OUI: 00:25:9C (8 E, 15 W), 68:7F:74 (13 E, 16 W)
Ethernet OUI: 00:25:9C (8 E, 15 W), 68:7F:74 (13 E, 16 W)
| FCC ID | |
|---|---|
| Linksys E3000 | Q87-E3000 Q87-WRT610NV2 |
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Linksys WRT610N v1 | Broadcom | Broadcom | Broadcom |
| Linksys WRT610N v2 | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Simultaneous Dual-N Band Wireless Router
• Support page • (Template link outdated)
"3763-40300105R" is silkscreened on the board in the FCC photos.
- WRT610N v2 Serial No (S/N) appear to start with CTG1.
Wikis
- Linksys routers page on Wikipedia
- WRT610N on OpenWrt wiki - OpenWRT works, you will need to build
- it with broadcom-wl to achieve full speed and make use of both radios.
Forum threads
- WRT610N thread on the DD-WRT forums
- WRT610N - Status thread on the DD-WRT forums
- Change your 610n V2 into an E3000 - Amended on the DD-WRT forums
- Unbrick/Install WRT610N v1&v2 using TFTP on the DD-WRT forums
- (label shot, 00:25:9C OUI)
Serial
