NanoPi K1 Plus

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

FriendlyARM NanoPi K 1 Plus

(Est.) release date: April 2018
(Est.) initial retail price (in USD): $35
Country of manuf.: China

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: USB 2.0 Female Micro-B

CPU1: Allwinner H5 (1.3 GHz, 4 cores)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (Samsung K4B4G16460-BCK0 × 4)

Expansion IFs: USB 2.0
USB ports: 3
Serial: yes, 4-pin header, 3.3V TTL, (115200 8N1)

WI1 module: unknown
WI1 module IF: SDIO 3.0
WI1 chip1: Realtek RTL8189ETV
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: integrated

ETH chip1: Allwinner H5
ETH chip2: Realtek RTL8211E
LAN speed: 1GbE
LAN ports: 1

bgn

Additional chips
3-pin Microprocessor Reset Circuit;ON Semi;NCP803;;1;
1A, 1.5MHz PWM Step-Down DC/DC Converter;Richtek;RT8059;;2;
2.5A, 1MHz Synchronous Step-Down Regulator; Silergy Corp;SY8032;;1;
6A, 18V I2C Programmable Voltage Regulator;Silergy;SY8106A;;1;
5.5V, 2A Low Loss Power Distribution Switch;Silergy;SY6280;;1;
300mA CMOS LDO Regulator;Richtek;RT9193;;1;

Stock bootloader: U-Boot 2017.11

Stock FW OS: Linux 4.14.111 FriendlyCore (UbuntuCore 16.04)

TPFirmware supported: Android 7, Armbian, FriendlyWrt, DietPi

Flags: HDMI 1.4, Micro SD Card slot, eMMC module socket, GPIO, DVP Camera Interface, CVBS header, Microphone, IR receiver, I2S, I2C

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 207 additional devices
of which 12 are FriendlyARM devices
Default login user: root
Default login password: fa
root:fa credentials used by 2 additional devices
of which 2 are FriendlyARM devices

802dot11 OUI: none specified

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

Single-board Computer

Product page
See also: List of Single-board computers

Specifications

  • CPU: Allwinner H5 @1.3GHz (Quad-core Cortex-A53)
  • GPU: Mali-450MP4 @600MHz (H.265/HEVC 4K)
  • Memory: 2GB (DDR3) SDRAM (Samsung K4B4G16460-BCK0 ×4)
  • Onboard Storage: TF card (max. 128GB)/MMC card slot, eMMC module socket
  • Ports: 1x GbE LAN, 3x USB 2.0 ports

Links

Models

NanoPi series • Amlogic • Allwinner • Rockchip • Samsung
 • NanoPi • >>

CPU: 2x ARM (Cortex-A72) @2.0GHz + 4x ARM (Cortex-A53) @1.5GHz
CPU: 4x ARM (Cortex-A55) @2.0GHz; GPU: Mali-G52 MP2 EE
CPU: 4x ARM (Cortex-A55) @2.0GHz; GPU: Mali-G52 MP2 EE
CPU: 4x ARM (Cortex-A76) @2.4GHz + 4x ARM (Cortex-A55) @1.8GHz
CPU: 4x ARM (Cortex-A76) @2.4GHz + 4x ARM (Cortex-A55) @1.8GHz
CPU: 2x ARM (Cortex-A72) @2.0GHz + 4x ARM (Cortex-A53) @1.5GHz
NanoPi M4 (2GB) • NanoPi M4 (4GB) • NanoPi M4V2 • NanoPi M4B
CPU: 4x ARM (Cortex-A76) @2.4GHz + 4x ARM (Cortex-A55) @1.8GHz
• NanoPi NEO2 • NanoPi NEO2 (512MB) • NanoPi NEO2 (1GB)
CPU: 2x ARM (Cortex-A72) @2.0GHz + 4x ARM (Cortex-A53) @1.5GHz)
CPU: 2x ARM (Cortex-A72) @2.0GHz + 4x ARM (Cortex-A53) @1.5GHz
CPU: 4x ARM (Cortex-A76) @2.4GHz + 4x ARM (Cortex-A55) @1.8GHz


Retrieved from "https://wikidevi.wi-cat.ru/index.php?title=NanoPi_K1_Plus&oldid=370402"