Swisscom TV Box HD

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Swisscom TV Box HD (IP1200) v5.1

Manuf (OEM/ODM): Arcadyan IP1200

(Est.) release date: 2014
Country of manuf.: China

Type: Android media player

Power: 220-240 VAC ~ 50 Hz, ? A
Connector type: AC (figure-eight)

CPU1: Marvell 88DE3108 (1.2 GHz, 2 cores)
FLA1: 16 GiB 16,384 MiB <br />17,179,869,184 B <br />134,217,728 Kib <br />16,777,216 KiB <br />131,072 Mib <br /> (Toshiba THGBMBG7D2KBAIL)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Hynix H5TQ4G63AFR × 2)

Expansion IFs: USB 2.0
USB ports: 1
JTAG: yes, unpopulated
Serial: yes, 4-pin header

WI1 chip1: Marvell 88W8897
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Marvell 88DE3108
LAN speed: 100M
LAN ports: 1

abgn+ac

Stock FW OS: Android TV

Flags: HDMI, Audio out

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 0 are Swisscom devices

802dot11 OUI: A8:D3:F7 (1 E, 1 W)
Ethernet OUI: A8:D3:F7 (1 E, 1 W)

For a list of all currently documented Marvell chipsets with specifications, see Marvell.


Swisscom TV Box (IP1200)

Support page

Models

Synaptics BG2CT (Dual-core @1.2GHz)
Synaptics BG4CT (Quad-core @1.2GHz) • Tables
Synaptics BG5CT (Quad-core @1.6GHz) 1GB

Serial

Boot log
 • Boot log
[     0] sys_init start. boot_strap=0x0000094c (source=eMMC), boot_state=0x0
CID_SerialNum=********  RCA=******.
eMMC init ok.
Load images from boot partition 1.
get_custom_key ok.
MV_DRMLIB_Load_Customer_Key OK.
bootloader_en:offset = 400,size = 51000,flags = 0,reserved = 
bootloader_en:offset = 400,size = 51000,flags = 0,reserved = 
[   563] image verified, start...
[   570] start_bootloader
pad settings:

RDKDMP BG2CT [Nov  9 2015 16:10:08]
uiBoot = 0
Pinmux configuration:

GSM 0xf7fcd040 0x00000230;
GSOC 0xf7ea0000 0x41000408;
GSOC1 0xf7ea0004 0x001a4003;

leakage info 400.
B0 chip, programmed OTP PVCOMP info.
New board version, uses SM_SPI to do PV COMP.
set voltage to 1290 mv.
set vcore to 1285mv
vout_percentage ae, set Vout to 1290mV
set vcore to 1290mv
vout_percentage ae, set Vout to 1290mV
power down usb0.
power down usb1.
Set sdio Clock to 66MHz
0xf7ea0014: 4e52a005 010c312b 00100000 08000000 
0xf7ea0028: 4e52a005 01cc0c03 00180000 008c6828 
0xf7ea003c: 46529805 01083029 00100000 00000000 
Clock configuration:
 VCO_B		frequency 1620
 AVPLLB[4]	frequency 250
 AVPLLB[5]	frequency 610
 AVPLLB[6]	frequency 690
 AVPLLB[7]	frequency 490
 cpuPll		frequency 1200
 memPll		frequency 1600
 sysPll		frequency 800
 dClk		frequency 400
 cpuClk		frequency 1200
 sysClk		frequency 400
 drmClk		frequency 400
 cfgClk		frequency 100
 gfxClk		frequency 400
 zspClk		frequency 490
 perifClk	frequency 200
 pCubeClk	frequency 800
 vScopeClk	frequency 800
 nfcEccClk	frequency 100
 vppSysClk	frequency 400
 appClk		frequency 800
 gfx3DCoreClk	frequency 690
 gfx3DSysClk	frequency 490
 arcRefClk	frequency 400
 vipClk		frequency 400
 sdioXinClk	frequency 66
 sdio1XinClk	frequency 66
 gfx3DExtraClk	frequency 400
 gc360Clk	frequency 400

 CID: ******** ******** ******** ********
Manufacture ID:17
Product name:016GE
Serial Number:******
 month=2, year=2246
[00,sd00] bootloader: part1(start=0, blks=1, version=201511091610), part2(start=0, blks=1, version=000000000000)
[01,sd01] fts: part1(start=32, blks=32, version=201511091610), part2(start=32, blks=32, version=000000000000)
[02,sd02] recovery: part1(start=64, blks=512, version=201511091610), part2(start=64, blks=512, version=000000000000)
[03,sd03] factory_setting: part1(start=576, blks=64, version=201511091610), part2(start=576, blks=64, version=000000000000)
[04,sd04] bootlogo: part1(start=640, blks=64, version=201511091610), part2(start=640, blks=64, version=000000000000)
[05,sd05] boot: part1(start=704, blks=256, version=201511091610), part2(start=704, blks=256, version=000000000000)
[06,sd06] system: part1(start=960, blks=2048, version=201511091610), part2(start=960, blks=2048, version=000000000000)
[07,sd07] cache: part1(start=3008, blks=2048, version=201511091610), part2(start=3008, blks=2048, version=000000000000)
[08,sd08] userdata: part1(start=5056, blks=8096, version=201511091610), part2(start=5056, blks=8096, version=000000000000)
[09,sd09] dra: part1(start=13152, blks=512, version=201511091610), part2(start=13152, blks=512, version=000000000000)
[10,sd10] timeshift: part1(start=13664, blks=8192, version=201511091610), part2(start=13664, blks=8192, version=000000000000)
bootloader_en:offset = 400,size = 51000,flags = 0,reserved = 
flash_ts_init() start.
fts: v601 loaded from 0x00960000
flash_ts_init() success.
Enabled AvPLL A and B Channels
Enable DVIO Pad
[fastlogo] flash_ts_get DisplayPrimarySystem=18
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
[fastlogo] flash_ts_get DisplayPrimaryWidth=1920
[fastlogo] flash_ts_get DisplayPrimaryHeight=1080
[fastlogo] got fit size logo: 1920x1080
[fastlogo] showlogo_start: logo_start=40, logo_end=4147240, logo_width=1920, logo_height=1080, logo_stride=3840
[showlogo] start:planeID=1, buf=b00000, width=1920, heigth=1080, stride=3840
macaddr=a8:d3:f7:**:**:**
Not warm up.
start to kick off SM CPU: start 0x00684364, size 46536
SM CPU is kicked off.
fts: crashcounter.android: 0
fts: bootloader.command: 
Kernel image decrypt start now
Kernel image decrypt finished 
verify Kernel image passed.
Ramdisk decrypt start now
Ramdisk decrypt finished 
Verify ramdisk passed
OTP Temperature: 106 celsius degree
Chip Version: 0xb0
macaddr=a8:d3:f7:**:**:**
Image3 bootargs:  macaddr=a8:d3:f7:**:**:** emmc_ts.dev_id=1 emmc_ts.size=16777216 emmc_ts.erasesize=524288 emmc_ts.writesize=512
mkbootimg bootargs: androidboot.console=ttyS3 console=ttyS3,115200 init=/init vmalloc=448M nfc_shared androidboot.hardware=mv88de3100 root=/dev/ram0
Ramdisk magic: 00088b1f
Generated bootargs: androidboot.console=ttyS3 console=ttyS3,115200 init=/init vmalloc=448M nfc_shared androidboot.hardware=mv88de3100 root=/dev/ram0  macaddr=a8:d3:f7:**:**:** emmc_ts.dev_id=1 emmc_ts.size=16777216 emmc_ts.erasesize=524288 emmc_ts.writesiread dtb patam size = 8483
set dtb param for linux!
Send bootmode=0 to SM.
Responding to SM...
Warm up.
power up usb0.
power up usb1.
[  2181] Boot normal GTV image
[Flash Write]page=0x00000cb2, buf=0x006d58b4, size=8192
[Flash Write]page=0x00000cb3, buf=0x006d78b4, size=8192
fts: record v602 commited @ 0x00964000
Start kernel at 0x01008000
Uncompressing Linux... done, booting the kernel.

Images