TRENDnet TEW-671BR
TRENDnet TEW-671BR
Manuf (OEM/ODM): Senao
Type: wireless router
FCC ID: S9ZTEW671BR, U2M-SR7750
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3052 (384 MHz)
CPU2: Ralink RT2880 (266 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320CTTC-70G)
FLA2: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160DBTI-70G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM63A165TS-6G)
RAM2: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)
Expansion IFs: none specified
Serial: yes, 4-pin header, internal, dual
WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Ralink RT2880
WI2 chip2: Ralink RT2850
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Ralink RT3052
Switch: Ralink RT3052
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
abgn
Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691;;2;
5GHz Power Amplifier IC;Richwave;RTC6671;;2;
Stock bootloader: U-Boot 1.0.1.1 Ralink
Stock FW OS: Linux
Default SSID: TRENDnet671A
, TRENDnet671N
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 122 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 49 are TRENDnet devices
FCC ID | |
---|---|
EnGenius ESR7750 | U2M-SR7750 |
Open-Mesh MR500 | U2M-SR7750 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
The device shares the same hardware as the Senao / EnGenius ESR7750. As such, the FCC ID of that device has been assigned to this entry.
"7016A0266000 V1.00" is silkscreened on the board.
Note: This device uses the RT3052 as the main processor. The RT2880 is operating in iNIC mode (operating as a NIC remotely via its MII interface).
The default SSIDs for the device are TRENDnet671A and TRENDnet671N.
The included power adapter is a AMIGO AMS6-1201000SU (12V, 1A).