TRENDnet TEW-732BR
TRENDnet TEW-732BR V1.0R
Manuf (OEM/ODM): Cameo
Type: wireless router
FCC ID: XU8TEW732BR
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Atheros AR1321 (535 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (GigaDevice 25Q64BSIG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5TU32M16DG-AC)
Expansion IFs: none specified
JTAG: 14-pin header, unpopulated
Serial: 4-pin header
WI1 chip1: Atheros AR1321
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Atheros AR1321
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: TRENDnet732-XXXX
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 122 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 49 are TRENDnet devices
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
N300 Wireless Router
This router sits upright like the ZyXEL NBG5715.
"Rev:A0-2" and "Made In China" is silkscreened on the board in the FCC photos.
The WiSoC used is an AR1321-AL1A.
Default settings are per the FCC manual. The XXXX in the default SSID pattern appears to be lower-case hex digits.
- The FCC label, however, specifies the default SSID pattern as TRENDnet732XXXX.
(The board contain a 4-pin UART (serial) output, as well as a 14-pin output (possibly for JTAG?).
Headers are unpopulated, need to be soldered. Board also has silkscreen and holes for one USB)
