Tenda PA7
Tenda PA7
FCC approval date: 21 June 2019
Country of manuf.: China
Series: AC650
Type: Powerline Access Point
FCC ID: V7TPA7
PCB ID: 10030831 V1.1
Power: 100-240 VAC ~ 50/60 Hz, 0.1 A
Connector type: AC (direct)
CPU1: Broadcom BCM47189B0 (900 MHz)
CPU2: Broadcom BCM60350
FLA1: ? MiB (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W631GG6KB-15)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM47189B0
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
WI2 chip1: Broadcom BCM47189B0
WI2 802dot11 protocols: bgn
WI2 MIMO config: 1x1:1
WI2 antenna connector: none
ETH chip1: Broadcom BCM47189B0
LAN speed: 1G
LAN ports: 1
abgn+ac
Flags: HomePlug AV2 1000, 256QAM
Default SSID: Tenda_XXXXXX (26 addl. devices)
, Tenda_XXXXXX_5G (1 addl. devices)
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 19 are Tenda devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
AV1000 AC Wi-Fi Powerline Extender
"10030831 V1.1" is silkscreened on the board in the FCC photos.
The device uses Broadcom BCM60350 as the HomePlug controller.
Sold as part of the Tenda PH10 AV1000 ac Wi-Fi Powerline Extender Kit which includes this PA7 with a Tenda P3 powerline adapter. This device does not appear to support configuration as single band with two-stream operation like the ZyXEL PLA5236 with similar hardware does. It is configured to use the Broadcom BCM47189B0 in 2x 1x1:1 mode.
- Web GUI: http://plc.tendawifi.com
