WeVO Hi1200AC
WeVO Hi1200AC
Availability: Korea only
(Est.) release date: November 2015
Country of manuf.: China
Type: wireless router
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12835F)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung K4B1G1646G-BCK0)
Expansion IFs: USB 3.0
USB ports: 1
Serial: yes, debug
WI1 chip1: MediaTek MT7612EN
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: soldered
WI2 chip1: MediaTek MT7603EN
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: soldered
ETH chip1: MediaTek MT7621AT
Switch: MediaTek MT7621AT
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Additional chips
5GHz Front End Module;Skyworks;SKY85717;;2;
Stock bootloader: U-Boot 4.3.0.0 Ralink
Stock FW OS: Linux 3.10.14
TPFirmware supported: LEDE Project (obsolete, OpenWrt) • (List)
Default SSID: WeVO_2.4G (2 addl. devices)
, WeVO_5G (2 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 122 additional devices
of which 3 are WeVO devices
Default login user: admin
Default login password: DZY-W2914NSV2
admin:DZY-W2914NSV2 credentials used by 2 additional devices
of which 2 are WeVO devices
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
11AC Giga NVR Router
- Product page (KR)
Note: it is an identical clone of WeVO W2914NS v2. You can flash WeVO W2914NS v2 firmware through U-Boot without any modification of firmware binary itself.
